Roland TrueVIS TR2 Cleaning (500ml) TR2-CL2

TR2-CL2 is the cleaning liquid packaged in a 500 ml bottle intended for maintenance and cleaning of TrueVIS printers using TR2 ink systems.

What it’s used for

•     Cleaning and flushing the ink delivery system and cleaning components (e.g., wipers) to maintain print quality and prevent clogs.
•     Typically used during routine maintenance or when switching between inks, to ensure smooth operation of TR2-based TrueVIS printers.

Compatibility and variants

•     The TR2-CL2 designation is commonly paired with TrueVIS printers that run TR2 inks (e.g., various VG/VG2/VG3 series configurations that support TR2).
•     Some suppliers offer TR2-CL2 in pouch or kit formats; ensure you’re purchasing the 500 ml bottle/kit labeled TR2-CL2 or TR2-CL for cleaning fluid compatible with TR2 inks.
•     If you’re replacing a pouch/kit, verify your printer model and ink configuration before purchasing.

How to use (typical process)

•     Power down the printer and follow the manufacturer’s cleaning procedure.
•     Use the cleaning fluid to flush the ink lines and wipe components as directed by Roland’s maintenance guidelines.
•     After cleaning, run a few test prints and perform any required refill or priming steps per your printer’s service manual.

Notes

•     Always follow the specific safety and handling instructions provided by Roland for cleaning fluids.
•     Using an unverified cleaning fluid could affect printheads or warranty; when in doubt, use the official or Roland-approved cleaning fluid.