Fujifilm Dimatix Performa Sapphire QS-256/30 AAA Printhead – New in Sealed Factory Box

Brand-new, factory-sealed Fujifilm Dimatix Performa Sapphire QS-256/30 AAA industrial inkjet printhead in original packaging. Designed for high-resolution, high-speed scanning printer architectures using UV-curable, solvent, and aqueous inks.

Key Features

• 256 individually addressable nozzles in a single inline row at 100 dpi spacing
• 30 pL nominal drop size, adjustable 30–80 pL in binary mode; 30 pL fundamental drop in grayscale
• Resolution up to 900 dpi with VersaDrop™ binary and grayscale jetting modes
• Nominal 8 m/s drop velocity for fluids in the 10–14 cP viscosity range
• Lightweight, thin-profile design optimized for scanning printer architectures
• Broad ink compatibility: UV-curable, solvent, and aqueous-based inks
• Integral temperature sensor, dual-ported design, minimal wetted surface area
• OEM-accessible non-volatile memory for tracking and system integration
• Precise alignment features to facilitate easy drop-in replacement

Technical Specifications

1. Model: Performa Sapphire QS-256/30 AAA (Fujifilm Dimatix)
2. Nozzles: 256 independent, inline
3. Native Drop Size: 30 pL (adjustable 30–80 pL binary; 30 pL grayscale)
4. Maximum Resolution: Up to 900 dpi
5. Nozzle Spacing: 100 dpi (0.010 in / 254 µm)
6. Nominal Drop Velocity: ~8 m/s
7. Ink Viscosity Range: 10–14 cP typical operating range
8. Ink Types Supported: UV-curable, solvent, aqueous
9. Special Features: VersaDrop™ technology, integral temperature sensor, dual-ported, NV memory

Printer Compatibility (Common Models)

• Durst: Rho 500R, Rho 700
• Inca: Onset S40, Onset S40i

Always verify compatibility with your specific printer model, firmware version, and current printhead part number before purchasing or installing.

Condition & Packaging

• Condition: New
• Packaging: Original, unopened factory-sealed box as supplied by Fujifilm/Dimatix
• Includes: Printhead unit only (hose barbs may not be included; confirm your system’s required variant before ordering)

Shipping

• Ships from: Malang, Indonesia
• Handling time: 1–2 business days after payment
• Carriers: FedEx International Priority /  DHL Express / Local couriers
• Estimated delivery: 2–5 business days
• International: 3–7 business days (depending on destination and customs)
• Tracking: Full tracking number provided automatically after dispatch
• All items are packed securely with anti-static and impact protection to ensure safe transit.

Returns

• Returns accepted: Yes
• Return window: 14 days from date of delivery
• Return conditions:
  • Item must be unused, unopened, and in original factory-sealed packaging
  • All original packaging, labels, and documentation must be intact
  • No returns accepted if the factory seal has been broken or the printhead has been installed
• Return shipping: Buyer pays return shipping unless the item is defective or not as described
• Restocking fee: May apply for non-defective returns

Please contact us before initiating a return so we can provide return instructions and an RMA number.

Warranty

1. Manufacturer warranty: Covered by Fujifilm Dimatix’s standard limited warranty for new printheads (warranty terms and duration are set by Fujifilm and may vary by region and authorized distributor status)
2. Warranty start: From the date of first installation or as defined by Fujifilm’s warranty policy
3. What is covered: Manufacturing defects under normal operating conditions
4. What is NOT covered: Damage due to misuse, improper installation, incompatible inks or fluids, electrical faults, or operation outside specified parameters

For warranty claims, you will need to contact either our support team or Fujifilm/authorized service, depending on your region and purchase channel. Proof of purchase and serial information will be required.

Compatibility & Use Disclaimer

• This printhead is intended for industrial and professional wide-format printing systems and is not a consumer-grade product.
• Compatibility with your printer depends on:
• Exact printer model and firmware version
• Current printhead part number and configuration (hose barbs vs. O-ring, electrical interface, etc.)
• Ink type, viscosity, and operating temperature within specified ranges
• The buyer is responsible for confirming that the Sapphire QS-256/30 AAA is the correct part for their system before installation.
• We strongly recommend that installation and priming be performed by qualified personnel familiar with industrial inkjet systems.
• We do not accept liability for costs related to downtime, misdiagnosis, incorrect part selection, or installation errors.

International Buyers – Please Note

• Import duties, taxes, and customs charges are the buyer’s responsibility and are not included in the item price or shipping cost.
• Please check with your country’s customs office before purchasing to understand any additional costs.

Questions?

• If you’re unsure whether this printhead is correct for your machine, please message us with:
• Printer make and model
• Current printhead part number (if available)
• Ink type used (UV, solvent, aqueous)
• We’ll help you confirm compatibility before you buy.