Xaar 2001+ GS6C Printhead

The Xaar 2001+ GS6C is the fine-detail version in the 2001+ family, aimed mainly at ceramic tile decoration where crisp text, patterns, and wall-tile graphics matter most. It has 2000 active nozzles, a 70.5 mm swathe width, 4 rows, and supports 1 or 2 fluid paths. It is designed for oil-based inks, with a drop volume range of 6 to 42 pL and up to 8 grey levels.

Performance profile

In single-color mode it runs at 720 dpi, and in dual-color mode at 360 dpi per color. The reported ink laydown for GS6C is 21 g/m² at 25 m/min and 10.5 g/m² at 50 m/min, though actual results depend on ink and system integration. Xaar positions the GS6C as the option for very fine details rather than maximum coverage or heavy special effects.
Buyer comparison

Quick buying advice

Choose GS6C if your priority is wall tiles, detailed motifs, or high-resolution decorative work where precision is more important than heavy ink laydown. Choose GS12C if you want a more flexible middle ground for mixed designs. Choose GS40C if you need the most intense effects and maximum laydown.

Check before purchase

Confirm the exact ink compatibility, controller/support electronics, and whether your printer is configured for single-color or dual-color operation. Also verify the intended production speed, because the usable laydown and quality are tied to the machine setup and ink system, not just the printhead alone. If you are buying used stock, inspect nozzle condition and availability of matching electronics or mounting hardware